The major difference between the solenoid valve and the electric valve in Australia

In the world of valves, people find it hard to distinguish between the electric valve and the solenoid valve Australia. This causes little challenges during selection as well as application. For people to get a clear knowledge of the two, this article will analyze their variations in detail.


For anyone to understand their differences, it’s vital to first know their definitions. Basically speaking, an electric valve is a device that’s controlled by an electric actuator so as to either close or open. It comprises two distinct parts; the electric actuator which is on the upper part, and the valve on the part that’s below. As for the solenoid valve, it’s a mechanical device that’s designed to control how fluids like water, oil, air as well as other gases, flow. It utilizes a magnetic plunger’s movements to do this. It’s also a blend of two primary units; an assembly of the plunger and solenoid, and a valve that features an opening where a plug or disc is positioned for the regulation of the flow.

First difference

As per these definitions, we could conclude that there’s one clear difference between them. It concerns the way the valve opens or closes. The electric motor generally opens or closes the electric valve. If you want to shut it off, you require some time analogy. Simultaneously, its opening and closing can be regulated. It features the forms of complete closing or opening, and half closing or opening. For the solenoid option, which you can get from any globally reliable solenoid valve supplier in Australia, it’s a magnetic plug that gets it opened or closed. When you power the coil, the plug gets drawn into the solenoid. The valves function when you apply current to the solenoid. The valve automatically returns to its initial position once the current ceases or is withdrawn. The valve can only be either on or off, and the opening or closing time is quite short.

Second difference

The nature of how they function is the second difference. As the electric valve is controlled by an electric motor, it can tolerate voltage surges, as compared to a solenoid valve that can’t. Solenoid valves are opened and closed within a very short time, therefore, they are frequently utilized for places that feature low pressure and flow rates but truly high intensity for switching. In addition, when there is an electric failure, solenoid valves can be fully restored while electric ones don’t have such a function. If they have to be restored, then a device for the restoring function must be installed.

Third difference

Their application is the third difference. Due to their varying working conditions and principles, their application also varies. Electric valves are frequently used as a switch or for regulations; like being used on a fan coil’s end. Solenoid valves are applicable for places with special needs; like in fluid mediums.

These are the main differences between the electric valve and the solenoid valve in Australia. It is hoped that this article will help you in making an informed decision whenever you need to buy one.

Leave a Reply